Can You Pressure Wash Bathroom Tiles – Do’s and Don’ts
Almost every bathroom these days has tiles in it. They look good, are easy to clean, and give off a shiny appearance which makes the bathroom appear cleaner than it actually is but can you pressure wash bathroom tiles?
Tiles, over time, accumulate tile grout. And cleaning this grout is a lengthy and time-consuming process. Scrubbing is one of the most effective ways to clean it, but like we mentioned, it is time-consuming. One effective measure that you can employ is enlist the help of an organization that does pressure washing in Gainesville, FL .
Can You Use a Pressure Washer on Bathroom Tiles?
The short answer is yes. You can use a pressure washer to clean bathroom tiles. In fact, pressure cleaning bathroom tiles is one of the most effective ways to clean them.
But there are some factors that you need to keep a track of before you decide to pressure clean your bathroom tiles. Before we get to that, let us understand exactly how a pressure washer functions.
What is a Pressure Wash?
A pressure washer is a device that uses high velocity water released under high pressure to clean dirt, grime, and dirt off of cars, driveways, sidewalks, roads, etc. Basically, to use it, you need to ensure that there is a solid support underneath whatever you are cleaning so that the water pressure does not cause structural damage to whatever you are cleaning.
For example, if you use a pressure washer on a roof or a wooden/plastic table, chances are that you would damage the structural integrity of those. So, while using it, you need to be careful regarding the things that you clean with it.
A pressure washer in itself is a hazardous equipment and can cause serious injuries if it gets into your eyes or the water stream hits other sensitive body parts. So extreme care is advised during the usage of the device.
Can the Water Pressure Damage the Bathroom Tiles?
Yes, it can. If you start off by using the water pressure at the maximum capacity, it will most likely end up causing some serious structural damage to the integrity of your bathroom flooring. So, it is important to start off with low pressure and slowly amp up the pressure as and when required.
Too much water pressure can cause the tile adhesives to be washed off which might lead to future problems like the loosening of the tiles, water logging, dampness, etc. So, the usage of water pressure on bathroom tiles is best left to professionals who have years of experience in the industry and have a clear idea regarding what they are doing.
What Do Professionals Use to Clean Grout in Bathrooms?
Cleaning professionals usually employ the help of chemicals and other cleaning agents to clear out the grout from the bathroom floors. The popular chemicals of choice for cleaning are hydrochloric acid, ammonia, and bleach.
The most effective way to clean tile grout is to wet the surface with warm water and then use a diluted solution of any one of these chemicals to slowly clean it out by scrubbing on it. Once you are done cleaning, you should apply a sealant to maximize the effect of your cleaning and prevent the dirt and grime from settling in easily in the future
What are Some Alternate Methods of Cleaning Bathroom Tile Grouts?
Vinegar is one very common household item that is quite effective in cleaning grout. A 1:1 solution of vinegar and water is the solution of choice.
Hydrogen peroxide and baking soda are also quite effective cleaning agents which can be used for this purpose. For pressure washing the ideal condition for cleaning grout is 1000-1200 PSI with a 2” nozzle.
Chemical cleaning agents are a better alternative than pressure washing for tile grout and the excessive pressure may damage the grout. But you can pressure wash bathroom tiles with the help of reliable pressure washing services.
So, if you are looking to get your bathroom tile grouts pressure washed, contact us today and we promise to get the job done without causing any harm to the tile grouts.